High Quality Advanced Elastic Outdoor Latex Paint Forexternal And
Internal Wall Paint Customized Color
This product is a kind of environmental friendly waterborne paint,
which is made up of elastic acrylic copolymer compound with UV
cross-linking and solidity function, high-quality pigments,
fillers, and various additives. This durable and washable coating
can keep elasticity in the temperature range of - 20 ℃ ~ + 40 ℃ for
a long time, so as to cover the wall cracking and make the coating
protected and anti-leakage. What’s more, with its cross-linking and
solidity, the coating has special performance of resisting
contaminants, water, acid rain, muggy, ensuring the neatness and
cleanness of the wall.
This product can be used for concrete, cement mortar, plaster and
other substrate especially for the maintenance and protection of
walls with cracks(≤1.5mm).
Ready to use.
● Airless Spray:
According to the decoration requirements, it can be divided into
monochromatic primary coating and composite primary coating. If
choose monochromatic primary coating: it can use both full spray
and spot spray, and exclusive dual or triple spray gun. The same is
true for composite primary coatings. Nozzle tip and spray pressure
are selected according to the color matching.
● Spray, brush, roller:
Recommended must achieve required thickness.
|Substrate temperature||10 °C||20 °C||30 °C|
|To touch (20μm)||4h||1h||40min|
|To handle (20μm)||24h||24h||20h|
|Min. recoating time||24h||1h||40min|
|Min. recoating time||/||/||/|
|* Make sure no chalking and other contaminations before recoating.|
* Above data for reference only, actual drying time and recoating
time is dependent on temperature, dry film thickness, ventilation
Surface treatment of each base layer: The quality of the coated
cement slurry and concrete base layer shall comply with JGJ73-91
construction and acceptance specifications for building decoration
The surface of the substrate must be clean, dry, solid, free from
oil and other dirt. The PI value is less than 10. If there is an
old coated wall, the loose, peeled, powdered coating should be
removed and smoothed with sandpaper.
In the case of moldy walls, wash the wall with 25% bleach hot
water, leave the washing liquid on the surface for 10 minutes, then
rinse thoroughly with water, dry for 48 hours before painting.
Surface pock and crevices should be coated with the company's
construction materials putty. It is necessary to construct the
treated wall as soon as possible after drying to avoid
Substrate temperature shall be at 3 °C higher than dew point,
relative humidity less than 85%. Measurement of temperature and
humidity should be close to substrate.
Healthy and Safety:
Please refer to MSDS before using this product. If you do not fully
understand the restrictions, or cannot follow MSDS directions
strictly, do not use this product. This volatile product is
flammable. Keep this product away from flame or fire. Smoking is
strictly prohibited in working area. Keep working area ventilated
during application to make sure solvent vapor content is low in the
air. PPE is necessary to avoid this product contacting with eyes or
skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Store this product in shady, dry, and ventilated warehouse. Storage
temperature should be above 0℃. The shelf life is 12 months at room
temperature. If exceeding shelf life, the products shall be tested
All technical data given in this document is based on our knowledge
achieved in lab and practice, it is not completely correct.
Although we try to keep the validity of our advice, however we
cannot predict the practical conditions that will affect paint
quality. Herein, we cannot be responsible for the consequences of
variations in such conditions, or for unforeseen conditions. We
reserve the right to modify this document without informing in