Anti-Abrasion And Waterproof Acrylic Resin Road Marking Paint
Reflective Road Marking Paint Spray Pressure
This one-component paint is mainly composed of acrylic resin,
pigments, fillers, solvent, etc. Its film has excellent performance
in toughness, adhesion and abrasion resistance. Besides, the
conspicuous film is provided with great resistance to water,
alkali, and weathering. What’s more, it’s impressive that this
paint will not bleed into the asphalt pavement.
This product is mainly used to mark the asphalt pavement.
rReady to use.
● Airless Spray:
Nozzle tip: 0.017~0.023 inch.
Spray pressure: 15~18 MPa.
Thinner ratio: 0~15% (by weight of paint).
● Brush, Roller:
Must achieve required thickness.
|Substrate temperature||10 °C||20 °C||30 °C|
|To touch (50um)||2h||1h||30min|
|To handle (50um)||8h||4h||3h|
|Min. recoating time||8h||4h||3h|
|Max. recoating time||-||-||-|
|* Make sure no chalking and other contaminations before recoating.|
|* Above data for reference only, actual drying time and recoating
time is dependent on temperature, dry film thickness, ventilation
condition, humidity, mechanical strength,etc.|
A: For the concrete base floor, first ensure reliable
moisture-proof facilities are set below the base concrete. New
concrete or the cement base shall be cured for at least 28 days
with moisture content not exceeding 5%. The moisture content shall
be evaluated empirically.
B: The surface of the base shall be clean, firm and free from
contaminants such as mortar paint splashes, curing agent, grease,
etc. It’s better to roughly polish the excessive floating pulp and
grind the oily ground with electric angle grinder.
C: Defects such as cracks and drums shall be repaired first.
D: The surface shall be clean, firm and dry whatever methods are
used to treat it. Above all, the surface shall not be in the state
of rising moisture.
E: The base layer shall be cleaned and burnished with a grinder.
Substrate temperature shall be at 3 ℃ higher than dew point,
relative humidity less than 85%. Measurement of temperature and
humidity should be close to substrate.
Safety and Healthy
Please refer to MSDS before using this product. If you do not fully
understand the restrictions, or cannot follow MSDS directions
strictly, do not use this product. The coating is a water-based
coating. Water-based solvent has mild eye irritation, upper
respiratory tract irritation, long-term close contact with dry
skin, etc. Proper ventilation and precautionary measures must be in
place. PPE is necessary to avoid this product contacting with eyes
or skin. More detailed safety tips are based on practical
Please handle used paint barrel correctly to avoid any pollution.
Store this product in shady, dry, and ventilated warehouse. The
shelf life is 12 months at room temperature. If exceeding shelf
life, the products shall be tested before using.
All technical data given in this document is based on our knowledge
achieved in lab and practice, it is not completely correct.
Although we try to keep the validity of our advice, however we
cannot predict the practical conditions that will affect paint
quality. Herein, we cannot be responsible for the consequences of
variations in such conditions, or for unforeseen conditions. We
reserve the right to modify this document without informing in